Technical specifications

– SWL 6.0 Tons


DNV approved from tubular sizes 2 3/8″ to 13 5/8″

Codes and standards

The calculations are made according to DNV standard for certification No. DNVGL-ST-0378 standard for offshore and platform lifting appliances. Accelerations during sea transport are calculated using parameters for medium vessels according to general guidelines for marine transportation 0030/NDI.


  • Recommended practice DNV-RP-C205: Environmental conditions and environmental loads. October 2010
  • DNV-OS-C101: Design of offshore steel structures, general (LRFD method), April 2011
  • DNV rules for planning and execution of marine operations: Part 2. Chapter 5: Lifting January 1996
  • DNV Standard for certification No. 2.7-1 ofshore containers April 2006.

Noble denton

General guidelines for marine transportations 0030/ND Rev. 4.

Material used

Two Materials are used to fabricate the system. Aluminum EN AW6063 and steel S355J2.

S355J2: Pad eyes, lifting pipes, bushing
Aluminum EN AW6063 TF: Main profile and all other small parts.

Stacked 50 m/s
Jacked up 50 m/s
Transportation 30 m/s
Lifting 44 m/s
Design conditions
Jacked up 52.5 m above LAT
Stacking 6 layers
Sea Transportations Vessel – L < 140 m B < 30 m
Se/a state
Pitch 12.5° – 10 sec
Roll 20.0° – 10 sec
Heave 0.2 g

ISO9001 certificate

DS/EN ISO 9001:2015

See certificate



See certificate